KLD 牌号库
这里把 PA6、PA66、PPS 三个体系的 KLD 牌号汇总在一张表里。同一牌号的不同颜色（本色 / 黑色）物性一致，增强比例与阻燃体系写在改性说明里。需要完整物性表或样品，按型号询价即可。
PA6 12 牌号
| 牌号 | 材质 | 改性体系 | 密度 g/cm³ | 拉伸强度 MPa | 热变形温度 ℃ | 阻燃等级 |
|---|---|---|---|---|---|---|
| KLD6006V0 | PA6 | Nitrogen based flame retardant nylon PA66 PA6, tested by hot wire, needle flame, and ball pressure tests | 1.17 | 65 | 200 | — |
| KLD6030AS | PA6 | Anti static nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | 1.2 | — | 205 | — |
| KLD6030CF | PA6 | Conductive nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | — | — | 205 | — |
| KLD6030G | PA6 | Fiberglass reinforced nylon PA66GF PA6GF, can be customized with 10% -50% fiber reinforcement | 1.33 | 163 | 205 | — |
| KLD6030GT | PA6 | Reinforced and toughened nylon PA66 PA6, customizable with 10% -50% fiber reinforcement | 13.5 | 144 | 205 | — |
| KLD6030H | PA6 | Thermal conductive nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | 1.276 | — | 205 | — |
| KLD6030MV0 | PA6 | Wear resistant reinforced flame-retardant nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | — | — | 205 | — |
| KLD6030T | PA6 | Toughened nylon, cold resistant, low temperature resistant, non boiling nylon PA66 PA6, reinforced with 10% -50% fibers can be customized | 1.08 | 55.8 | 205 | — |
| KLD6030UV | PA6 | UV resistant, anti-aging nylon PA66 PA6, fiber reinforced 10% -50% can be customized | 1.36 | — | 205 | — |
| KLD6030V0 | PA6 | Reinforced flame-retardant nylon PA66 PA6, fiber reinforced 10% -50% can be customized | 1.45 | 128 | 205 | — |
| KLD6030W | PA6 | Hydrolyzable nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | 1.33 | — | 205 | — |
| KLD60NG | PA6 | Injection grade, non reinforced, pure resin PPS | 1.35 | 100 | — | — |
PA66 13 牌号
| 牌号 | 材质 | 改性体系 | 密度 g/cm³ | 拉伸强度 MPa | 热变形温度 ℃ | 阻燃等级 |
|---|---|---|---|---|---|---|
| KLD6600V0 | PA66 | Nitrogen based flame retardant nylon PA66 PA6, tested by hot wire, needle flame, and ball pressure tests | 1.17 | 80 | 238 | — |
| KLD6606V0 | PA66 | Nitrogen based flame retardant nylon PA66 PA6, tested by hot wire, needle flame, and ball pressure tests | 1.17 | 72 | 215 | — |
| KLD6630AS | PA66 | Anti static nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | 1.21 | — | 250 | — |
| KLD6630CF | PA66 | Conductive nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | — | — | 250 | — |
| KLD6630G | PA66 | Fiberglass reinforced nylon PA66GF PA6GF, can be customized with 10% -50% fiber reinforcement | 1.4 | 189 | 250 | — |
| KLD6630GT | PA66 | Reinforced and toughened nylon PA66 PA6, customizable with 10% -50% fiber reinforcement | 1.34 | — | 250 | — |
| KLD6630H | PA66 | Thermal conductive nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | 1.269 | — | 250 | — |
| KLD6630MV0 | PA66 | Wear resistant reinforced flame-retardant nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | — | — | 250 | — |
| KLD6630T | PA66 | Toughened nylon, cold resistant, low temperature resistant, non boiling nylon PA66 PA6, reinforced with 10% -50% fibers can be customized | 1.08 | 54.5 | 250 | — |
| KLD6630UV | PA66 | UV resistant, anti-aging nylon PA66 PA6, fiber reinforced 10% -50% can be customized | — | — | 250 | — |
| KLD6630V0 | PA66 | Reinforced flame-retardant nylon PA66 PA6, fiber reinforced 10% -50% can be customized | 1.65 | 153 | 250 | — |
| KLD6630W | PA66 | Hydrolyzable nylon PA66 PA6, reinforced with 10% -50% fibers, can be customized | 1.4 | 189 | 250 | — |
| KLD67C | PA66 | Glass fiber/mineral composite reinforced PPS, low shrinkage, low warpage, high dimensional accuracy, high strength | 1.95 | 150 | — | — |
PPS 15 牌号
| 牌号 | 材质 | 改性体系 | 密度 g/cm³ | 拉伸强度 MPa | 热变形温度 ℃ | 阻燃等级 |
|---|---|---|---|---|---|---|
| KLD10NG | PPS | Extrusion grade, non reinforced, pure resin PPS | 1.34 | 95 | — | — |
| KLD15T | PPS | 15% short cut glass fiber reinforced PPS, super toughness, high impact resistance, excellent chemical resistance | 1.36 | 130 | — | — |
| KLD30AS | PPS | PPS alloy, low friction coefficient, low wear, high strength, excellent electrical performance | 1.5 | 190 | — | — |
| KLD30C | PPS | 30% short cut glass fiber reinforced PPS, high fluidity, balanced mechanical properties, excellent chemical resistance | 1.55 | 130 | — | — |
| KLD30CF | PPS | Carbon fiber reinforced PPS, low friction coefficient, low wear, ultra-high strength, excellent chemical and heat resistance | 1.45 | 200 | — | — |
| KLD30R | PPS | 30% short cut glass fiber reinforced PPS, high toughness, excellent chemical resistance | 1.51 | 130 | — | — |
| KLD30SF | PPS | PPS alloy, low friction coefficient, low wear, corrosion resistance, excellent heat resistance | 1.55 | 150 | — | — |
| KLD37C | PPS | Glass fiber/mineral composite reinforced PPS, low warpage, good mechanical properties, excellent electrical and heat resistance | 1.75 | 150 | — | — |
| KLD40A66 | PPS | Low chlorine content (total chlorine less than 900ppm), 40% chopped glass fiber reinforced PPS, balanced mechanical properties | 1.68 | 165 | — | — |
| KLD40C | PPS | 40% short cut glass fiber reinforced PPS, universal grade, balanced mechanical properties, excellent chemical and heat resistance | 1.66 | 165 | — | — |
| KLD40D | PPS | 40% glass fiber reinforced PPS, high cost-effectiveness, balanced mechanical properties, universal grade | 1.68 | 150 | — | — |
| KLD40L | PPS | 40% short cut glass fiber reinforced PPS, high fluidity, high strength, excellent chemical and heat resistance | 1.66 | 180 | — | — |
| KLD40R | PPS | 40% short cut glass fiber reinforced PPS, high toughness, low flash, excellent chemical and heat resistance | 1.63 | 155 | — | — |
| KLD57C | PPS | Glass fiber/mineral composite reinforced PPS, low shrinkage, low warpage, good mechanical properties, high dimensional accuracy | 1.89 | 145 | — | — |
| KLD57D | PPS | Glass fiber/mineral composite reinforced PPS, low shrinkage, low warpage, good mechanical properties, high dimensional accuracy | 1.89 | 145 | — | — |